Expert Answers about CrossRoads Sunset Trail Super Lite Travel Trailer

• Determining Which Braking Assemblies Fit 2016 Crossroads Sunset Trail Super Lite 15 250RB
• The correct braking assemblies for your 2016 Crossroads Sunset Trail Super Lite 15 250RB are going to be dependent on the size of your drums. Since your trailer has a GVWR of 7582 and tandem axles it more than likely uses 10" brake assemblies which are the Dexter # 23-468-469 or the etrailer # AKEBRK-35-SA. You can confirm this by measuring the diameter and depth of your drums following the included diagram. Neither kit comes with new mounting hardware so if your current hardware is in...
  view full answer...


• Recommended Trailer Hitch for a 2020 Ford Escape
• The trailer hitch I recommend for a 2020 Ford Escape (All Models Except Hybrid) is the Curt Trailer Hitch Receiver part # C23FR. The Curt hitch is an excellent option because it has a hidden design which means you only have to see the receiver tube under the rear bumper, not the bulky and unsightly cross tube therefore you will retain a very factory-like appearance. Furthermore, the Curt hitch because it has a hidden design will provide the best ground clearance as well so no need to worry...
  view full answer...


• Could Curt RV Hitch C19101 Be Used to Flat Tow a Vehicle
• There's not reason the Curt hitch # C19101 couldn't fit the rear bumper of your 2020 Crossroads Sunset and be used to flat tow a vehicle as long as it weighed less than 3,500 lbs.
  view full answer...


• Trailer Hitch Recommend for 2012 CrossRoads Sunset Trail Super Lite Wont Interfere with Stabilizer
• I have a better hitch solution for your 2012 CrossRoads Sunset Trail Super Lite than the # 13703. Instead I'd recommend the Curt # E-100 as this hitch installs on the 4 inch square bumper your trailer has which allows you to not have worry about stabilizer jack interference, installs much easier, and gives you a hitch that's easier to access as it won't be recessed behind the rear bumper. This has same capacities as the # 13703 that you referenced as well.
  view full answer...


• Lifting a Fifth Wheel to Fit a New and Taller Truck
• I have been in contact with Lippert, and I was able to get the individual brackets # LC84PJ added to our site. These will be direct replacements for the Lippert LC407131. As you are only needing these for the center hangers, you will need four of these to get you up and running.
  view full answer...


• MORryde StepAbove RV Step that Fits Cross Roads Sunset Trail
• Thank you for the pictures of the doorway width and height of your Cross Roads Sunset Trail. Based on the doorway width and the threshold height the correct MORryde Stepabove that you'd want is the part # MR98RR. This fits doorway widths of 23-3/4 inch to 26-1/4 inch and heights between 30-33-1/2 inch.
  view full answer...